Skip to main content
Products

Products / Thin, strong cable trays

Thin, strong cable trays

Cable trays made thinner and lighter with a stronger material.

High-strength cold-rolled PosMAC (CR PosMAC) reduces the side rail thickness. Widths and heights stay the same.

Thin cable trays

The same widths and heights are made with thinner side rails. The thickness and its calculation basis are shown below.

Equivalent thickness · Compared with hot-rolled PosMAC
2.3t to 1.4t
Same yield capacity · 39.1% less steel used

Equivalent-thickness calculation — ratio of specified minimum guaranteed yield strengths (500 / 295 MPa). Equivalent thickness based on yield strength; deflection (stiffness) must be checked for the support spacing.

  • 1.4t · 1.2t · 1.0t products available
  • Test reports are available for 1.4t cable trays.
  • Our latest test report covers a 1.4t cable tray tested by the KS test method.

A stronger material

See at a glance where the strength and corrosion resistance stand.

High-strength CR PosMAC is in the highest strength class of KS D 3030 cold-rolled steel sheet.

Strength
0GIGA STEEL 1,000Conventional steel 270400 class570 classHot-rolled PosMACCR PosMAC
Corrosion resistance
GI 1×PosMAC SuperAround 5×PosMAC

Strength = Based on tensile strength (TS)

Corrosion resistance = Compared with GI at the same coating mass · Flat sheet area

Thin steel covers

Covers are also made from strong, thin steel sheet.

Covers are available across the product range — tell us the items and sizes.

Go to products

Thin specifications are discussed on the basis of the products below.

Contact us at +82-54-262-5383 with the items, sizes and quantities. We will confirm feasibility and the schedule.

Need help with your project specifications?

Contact us for quotations, technical support and supply inquiries.

Contact us →